What All do I need For my AR15 To run?
You need a Super Saftey, Cut Trigger with Detent. you can get them in one package here.
Light Primer Strikes
Light Primer Strikes Are Commonly caused by bolt bounce, to eliminate this you need the Anti Bolt Bounce kit. OR you might be able to get away with the 3OZ buffer weight alone.
These are all typical indications of bolt bounce; the bolt group recoils slightly when it closes and doesn’t lock the bolt into the barrel extension on the first try. Like slamming a door that bounces open instead of latching and staying closed.
The hammer is released as the bolt is closing and strikes the bolt carrier when it is not fully in battery. The free-floating firing pin then moves under its own inertia and dimples the primer as the bolt goes into battery.
The solution for most end users is to increase the buffer weight to an H3 or an A2 rifle buffer (both are approx. 5.3oz).
If you’re using currently using an H3 and experiencing bolt bounce/dead trigger over a live round, you will need to upgrade to a heavier buffer – an A5 buffer tube (there are several options available from $38 and up) and using 4” A5 buffers or cheap 4” PCC buffers.
The Odinworks.com 9mm adjustable buffer (5.4oz-7.4oz)is the standard 3.25” carbine buffer length and works with a standard M4 buffer tube.
Are These Legal?
Under The Current federal laws and recent court rulings, YES. These triggers require a single press of the trigger for each shot fired. As the bolt moves backwards, it forces the trigger to into a reset/safety position. As the slide moves forward, the trigger is no longer forced into a reset / safety position, allowing it to be activated again!
A federal court decision (National Association for Gun Rights, Inc. v. Garland, Case No. 4:23-cv-00830) Ruled that FRT’s (forced Reset Triggers) are NOT considered machine guns under federal law. However Certain states have banned them, including Florida, California, Colorado (Broomfield and Boulder County), Connecticut, Delaware, Hawaii, Illinois, Maryland, Minnesota, New Jersey, New York and Rhode Island.
How to Maintain My safety
It is advised for you to lubricate where the cam and lever interact along with mainly where the cam and detent interact. I use WD40 libricant.
Where Is My Order / Shipping
It is just me so I apoligize in advace I try to get orders out within the same week they where placed.
WE CAN NOT SHIP TO – Florida, California, Colorado (Broomfield and Boulder County), Connecticut, Delaware, Hawaii, Illinois, Maryland, Minnesota, New Jersey, New York and Rhode Island.